Canvas link: https://ucsb.instructure.com/courses/17178/assignments/192308

Individual lab, but you may help one another

This is an individual lab on the topic of Java web apps.

You may cooperate with one or more pair partners from your team to help in debugging and understanding the lab, but each person should complete the lab separately for themselves.

Ask for help on #help-jpa02

There should be a slack channel called #help-jpa02 where you can ask questions about this assignment. Check that channel first to see if your question has already been answered.

Step 1: Understanding what we are trying to do

What are we trying to accomplish again in this lab?

  • In this lab, we will create a basic “Hello, World” type web app in Java”, and deploy it to the web using Dokku.
  • A web app is a piece of Java code that takes HTTP request messages as input, and responds with HTTP response objects as output.
  • Dokku is a platform where we can host a Java web app; it is an open source web platform that tries to capture much of the features of the commercial platform Heroku, but that we can host internally at UCSB (so that you do not incur any credit card bills). -

Web Apps vs. Static Web Pages

You may already have some experience with creating static web pages, and/or with creating web applications (e.g. using PHP, Python (Django or Flask) or Ruby on Rails.) If so, then the “Learn More” section will be basic review.

If you are new to writing software for the web, you are strongly encouaged to read the background information at the “learn more” link below.

More about Dokku

  • Web applications run on the “server” side of the web architecture, not the client side.
  • So to test a web application, we need to set up a web server that can run Java code.
  • You can run applications at a URL such as http://localhost:8080 but that app is only available in a browser on the same computer as where the mvn spring-boot:run command was performed, (i.e. the “local host”, typically your laptop.)
  • Configuring a public web server for Java is challenging. But, fortunately, we don’t have to; the folks that maintain CSIL have already done that for us.
  • Dokku offers “platform as a service” cloud computing for Java web applications (along with many other platforms)
  • This puts your application “on the web”, for real, so that anyone in the world can access it 24/7
  • Dokku offers many of the same features as Heroku, but through a command line interface rather than a web interface

What are we trying to accomplish again in this lab?

If you just did a deep dive into the article Web Pages vs. Web Apps it may be helpful to again review what we are trying to accomplish in this lab:

  • In this lab, we will create a basic “Hello, World” type web app in Java”
  • To test that, we need to run that on a server somewhere.
  • Configuring a web server for Java is challenging. But, fortunately, we don’t have to.
  • Dokku offers “platform as a service” cloud computing for Java web applications.

Disk Quota

IMPORTANT: if you are working on CSIL, and at some point things just “stop working”:

  • You get odd error messages, especially “cannot write file”, or “disk quota exceeded”
  • You cannot log in—it takes your user name and password on the machines in Phelps 3525 or CSIL, but then just logs you out immediately.

Then you probably have a disk quota problem.

  • The best way to troubleshoot this, if you cannot log in, is to ask someone else that CAN log in to allow you to use a terminal window on their screen.
    • Use ssh yourusername@csil.cs.ucsb.edu to get into your account from their terminal session.
  • For troubleshooting tips, visit: CSIL Disk Quota Troubleshooting

Step 2: Login to Dokku

Consult the page that shows the teams for this course; it should have a column that shows the name of your dokku server:

Or, consult this table if you know your team number:

Team Dokku server
w24-4pm-1 dokku-01.cs.ucsb.edu
w24-4pm-2 dokku-02.cs.ucsb.edu
w24-4pm-3 dokku-03.cs.ucsb.edu
w24-4pm-4 dokku-04.cs.ucsb.edu
w24-5pm-1 dokku-05.cs.ucsb.edu
w24-5pm-2 dokku-06.cs.ucsb.edu
w24-5pm-3 dokku-07.cs.ucsb.edu
w24-5pm-4 dokku-08.cs.ucsb.edu
w24-6pm-1 dokku-09.cs.ucsb.edu
w24-6pm-2 dokku-10.cs.ucsb.edu
w24-6pm-3 dokku-11.cs.ucsb.edu
w24-6pm-4 dokku-12.cs.ucsb.edu
w24-7pm-1 dokku-13.cs.ucsb.edu
w24-7pm-2 dokku-14.cs.ucsb.edu
w24-7pm-3 dokku-15.cs.ucsb.edu
w24-7pm-4 dokku-16.cs.ucsb.edu

Remember your dokku hostname; you’ll need it throughout the course.

You can also find a table of these here: https://bit.ly/cs156-w24-teams

To login to your dokku host:

  1. Login to your CSIL account via ssh username@csil.cs.ucsb.edu where username is your username
  2. Type this, substituting in your dokku number instead of 13: ssh dokku-13.cs.ucsb.edu
  • If you can login, you may continue to the next step.
  • If you cannot login, see the troubleshooting instructions here: https://ucsb-cs156.github.io/topics/dokku/logging_in.html
  • All development for this project should be done locally(preferred) or CSIL(only if your own machine hasn’t been set up properly). Dokku is used only for deployment purposes.

Step 3: Create your repo

You should already have a repo under the course organization ucsb-cs156-w24 called jpa02-githubid created for you by the staff, where github is your github id.

If not, create one for yourself following that naming convention; it should initially be public (not private), and empty (no README, license or .gitignore.)

Clone that repo somewhere and cd into it.

Then add this remote:

git remote add starter https://github.com/ucsb-cs156-w24/STARTER-jpa02

Then do:

git checkout -b main
git pull starter main
git push origin main

Step 4: Start your webapp on localhost

The application should be ready to go out of the box; it starts up a web server that brings up a page with the message Greetings from Spring Boot!

We are going to run a command to start up this web server and then try to connect with a browser.

  • First, use mvn compile to make sure that the code compiles.

    • If you get the error on CSIL about JAVA_HOME not being defined correctly, you may need this command: 
      export JAVA_HOME=/usr/lib/jvm/java-17-openjdk
  • Next, try mvn test to be sure that the test cases pass.

  • Then, try mvn spring-boot:run. This should start up a web server on port 8080 running on localhost

    The mvn spring-boot:run command is a shortcut that is provided for us to be able to run the jar file. It does pretty much the same thing as if we ran the .jar file and specified the class containing our main on the command line.

Connecting with a browser

Now, if you are running on your own machine, connecting with a browser is quite simple; the web server is running on the local machine (localhost) on port 8080, so putting the address http://localhost:8080 in your browser will just work. If you are successful, you should see the message Greetings from Spring Boot appear in your browser.

It’s the case where you are running on CSIL where things can get more complicated.

First, there’s the possibility that port 8080 may already be taken; in that case you’ll see the error:

Web server failed to start. Port 8080 was already in use.
To see how to fix the `Port 8080 was already in use` error, click the triangle:

In this case, the fix is to choose another port number. Any number between 8080 and 65535 is fair game; to try another port number, use the command shown below (change 12345 to whatever port number you like):

PORT=12345 mvn spring-boot:run

You’ll need to substitute this number (e.g. 12345) in place of 8080 when trying to load the website.

To see strategies for bringing up a web page for a web server running on CSIL, click the triangle.

Strategy 1: Point browser directly at CSIL machine

If you are running on CSIL, you can try to point your web browser at the machine where the server is running instead of localhost.

For example, if you are running on CSIL and type in hostname, and see this:

[pconrad@csilvm-01 ~]$ hostname
csilvm-01.cs.ucsb.edu
[pconrad@csilvm-01 ~]$

Then substitute that name in place of localhost, e.g. point your browser as http://csilvm-01.cs.ucsb.edu:8080 instead of http://localhost:8080

This may not always work, because firewalls may prevent access. Using the UCSB VPN may help.

Strategy 2: Port Forwarding

If you are using ssh to connect to CSIL, the solution shown here allows you to forward traffic on localhost:8080 on your own machine to localhost:8080 on the machine you are connecting to:

Strategy 3: Remote Desktop

Using the Remote Desktop (RDP) Solution described in the articles below, you can load a complete “desktop” of a CSIL Linux environment and show it in a window on your Mac or Windows machine.

In the RDP window, you can open both a terminal window and a browser that are both running on CSIL. Since that browser is running on the same system as the web server, you can just use http://localhost:8080 to connect to the server.

About localhost and “Port Numbers”

The code in this repo is configured to start up a webserver on port 8080, running on localhost, which is a name for the machine on which the code is running.

  • If you are running the code on a CSIL machine, then localhost refers to that machine.
  • If you are running on your own machine, then locahost refers to that machine.
  • The port number is a more specific “communications channel” on that machine. You can find more information on port numbers at this short article, which you are encouraged to read if you are not already familiar with port numbers (or, for that matter, even if you are): https://ucsb-cs156.github.io/topics/port_numbers.html

So the web address to acccess your server is: http://localhost:8080.

  • Note: You should use http not https when running on localhost. Using http is the unsecure, unencrypted version.
  • It is possible to set up Spring Boot to run https (the secure, encrypted version), but it’s complicated and typically unnecessary;

Step 5: Understanding localhost vs. Dokku

When running on localhost:

  • The web app is only runnning as long as your program is executing.
  • As soon as you CTRL/C the program to interrupt it, the web app is no longer available.
  • The web app is only available on the machine where you are running the program; not on the public internet.

Running on localhost is fine for testing and development. But eventually we want to know how to deploy a web application so that anyone on the internet can access it.

To get the web app running on the public internet, we’ll need to use a cloud-computing platform.

A note about security: Let’s say up front that this is a risky thing to do. You need to be very careful about security when deploying web applications to the public internet. Fortunately, this particular application is rather simple and low-risk. We’ll discuss web security throughout the course.

Step 6: Create a new Dokku app and link your Github repo

In this step, we’ll deploy our Spring Boot application to the public internet using dokku.

You can follow the instructions here to create a new app. Use the name jpa02-yourgithubid

This should result in an app at the address http://jpa02-yourgithubid.dokku-xx.cs.ucsb.edu

Step 7: Use the dokku commands

On your dokku machine, you should now be able to try a few commands. Use your app name in place of: jpa02-cgaucho

  • dokku apps:list
  • dokku logs --tail jpa02-cgaucho

Step 8: Changing what is shown on the page

Go into the Java source code under src and locate the file /src/main/java/edu/ucsb/cs156/spring/hello/HelloController.java

In this file, locate the line of code that says:

    @RequestMapping("/")
    public String index() {
        return "Greetings from Spring Boot!";
    }

This method returns the contents of the home page ("/") for the webapp.

Change that code by changing “Spring Boot” to your email address (without the @ucsb.edu part).

For example, if your email is cgaucho@ucsb.edu, instead of:

        return "Greetings from Spring Boot!";

You’ll have:

        return "Greetings from cgaucho!";
If your email contains upper-case letters, underscore (`_`) or periods (`.`) click the triangle for special instructions:

Update: The autograder has been modified to handle the cases of:

  • mixed case (upper and lowercase letters) in email addresses
  • underscores _ in email addresses
  • periods . in email addresses

In order to convert each of these to legal app names, the autograder converts your email by:

  • stripping off the @ and everything after the @
  • converting to all lowercase
  • converting _ and . to - Examples:
  • Foo.Bar@ucsb.edu becomes foo-bar
  • My-Lit.tle_pony@umail.ucsb.edu becomes my-lit-tle-pony

So, if your email address is My-Lit.tle_pony@umail.ucsb.edu, you should modify your code to replace:

        return "Greetings from Spring Boot!";

with

        return "Greetings from my-lit-tle-pony!";

If your email presents any other corner cases that are handled above, make a post on #help-jpa02 on slack to ask for help.

Then:

  • use mvn compile to make sure your code still compiles
  • (optional, but suggested in case you need to debug)
    • use mvn spring-boot:run to test locally, perhaps with curl http://localhost:8080
  • Use git add, git commit, and git push to push your changes to github.

  • Redeploy your app using Dokku

    To redeploy, follow the steps here:

Ok, so far, we haven’t really done anything we couldn’t have done with a static web page. But we have gotten a working Java web app running, so it’s start we can build on.

Step 9: The test cases

You’ll see that when you run “mvn test” that there are test cases, some of which are now failing.

The test cases are in these files:

  • src/test/java/hello/HelloControllerTest.java (Unit Test)

Run the tests and see them fail.

Then modify them so that they pass.

You should commit the changes to the tests to GitHub.

Note that from a “purist” point of view, we are doing TDD “wrong” this time; to do it “the right way”, we should have modified the tests first, and then modified the code so that the tests pass.

We can pivot to this style of working once we have a better grasp on all the moving parts here—or not. To be honest, there are times when the pure TDD approach is good, and other times when it’s more effective to get something working, and then figure out how to test it. It’s good to understand various ways of approaching testing, and the pros/cons of each approach.

Step 10: Adding links to running web app in the README.md

Edit your README.md. You’ll find some TODO items inside indicating what edits you need to make.

All quarter long, we want you to develop the habit of adjusting the README.md in your repo to include a link to your running web app, and sometimes other things as well.

Follow the instructions

Step 11: Submitting your work for grading

When you have a running web app on Dokku, make a submission under jpa02 on Canvas with a link to your repo.

For full credit:

  • The link should be something like : https://github.com/ucsb-cs156-w24/jpa02-cgaucho
  • It should NOT be: http://jpa02-cgaucho.dokku-01.cs.ucsb.edu
  • BUT: the README at the link should contain a link to your running app on dokku.